Family elevator line of Vimec - Italy
Advantages of Vimec elevator
-The whole system is imported 100% from Italy with top quality finishing, delicate to every detail.
- Very smooth operation.
- Extremely low power consumption with only 1.5Kw (standard type)
-Do not require reserved space to arrange the control cabinet.
- Extremely small pits depth from 120mm to masonry and 140mm with pits using metal structure.
-The minimum OH height does not require much from 2450mm only.
-The maximum number of stops can reach 5S / 0 with 14.6m journey.
-Large load capacity from 300 ~ 500 Kg.
-Is a non-machine room elevator and does not use counterweight;
-Power source used: 1 phase current 220v frequency 50Hz.
-When there is a power outage, the elevator automatically returns by floor to take people out of the cabin.
-Environmental friendly system with lifting electric equipment is completed basing on Machinery Directive 42/2006 standard with all main equipment produced by regenerating materials.
-Can expand the load range with HL (Heavy Load) ladder range up to 500Kg and up to 0.26m / s speed with HS (High Speed) line. * With this line, counterweight is used with a volume of 150Kg, and power consumption up to 2.2Kw.
Safety devices
-The roof system can withstand 120Kg load (for metal frame use)
-The safety switch under Pít with the visual monitoring system with flash indicator along with manual reset button.
-The mechanical lock device for Headroom section is monitored electronically.
- O.S.G over speed control
-Automatic electronic monitoring system that overlaps the driving belt will impact off the elevator when the middle fault occurs.
-O.L.C overload alarm system
-In case of power failure, the system will operate with 36Volt battery backup battery.
-Easy maintenance by controlling the elevator directly in the cabin.
Equipment inside the cabin
-The infrared barrier is equipped at the sides without wall panels.
-Interface communication with visual layout in the cabin
-Display overload in the cabin
-Large physical button size 50x50mm with braille indicating number of floors
- Control panel height in accordance with European standards EN81-41
- The button illuminates the background with the color indicator of the modes
- Emergency stop button
- Lighting lamp in form of energy saving led bar
- Automatic system of buttons on the control panel linked with infrared barrier system automatically without user intervention.
- One touch operation (... ..
General characteristics
- Control system is arranged to control on the ground.
- Belt transmission
- Drive motor 1.5Kw three phase 220V 50Hz
- 01 phase inverter system meets output capacity of 2.2Kw
- Tractor system uses electric force
- Destination and departure point with soft start / stop control system.
- Voltage supply 24v DC
- When there is a fire alarm signal, the elevator will take the customer to safety floor
- The physical key is located directly on the control panel, intuitive to manipulate.
There are 2 popular Vimec lines:
E10-ECOVimec LINE
* The system is suitable for people with limited mobility and disabilities
Compliance with standards:
-The standard of TUV safety brake
- Standard for TUV floor door locks
- Complies with European standards 2006/95 on low voltage
- Compliance with European standards 2004/108 on electromagnetic compatibility
- Compliance with European standards 42/2006 Direct drive tractor system
Installation:
- The system can be installed indoors or outdoors. It is an elevator without machine room MRL (Machine Roomless system).
- For outdoor installation systems must have a roof.
Working load: The table below shows the working load depending on the cabin and cabin door system.
| Cabin type: E10 EcoVimec |
Working load (Kg) |
Heavy Load |
High Speed |
| Cabin with painted walls or stainless steel |
400 |
500 |
500 |
| Cabin with glass wall |
300 |
400 |
400 |
| Cabin 1 entrance + 01 cabin wall of steel coating, stainless steel |
300 |
400 |
400 |
| Cabin 1 door + 01 glass wall |
300 |
400 |
400 |
| Cabin 1 door + 02 glass walls |
300 |
400 |
400 |
| Cabin 02 doors + 01 cabin wall of steel coating, stainless steel |
300 |
400 |
400 |
| Cabin 1 door + 01 glass wall, |
300 |
400 |
400
|
- Maximum number of stops: 5 stops (14.6m)
- OH height: 2,450 mm; 2,600 mm if the cabin is provided with automatic glass doors.
- Transmission: Instant electric motor of gearbox and belt
- Speed: Up to 0.15 m / sec; HS version (provided with a counterweight) up to 0.26 m / s other markets.
- Size of installation elevator:
Vimec E07-Easy move line
* The system is suitable for people with limited mobility and disabilities
Compliance with standards:
- The standard of TUV safety brake
- Standard for TUV floor door locks
- Complies with European standards 2006/95 on low voltage
- Compliance with European standards 2004/108 on electromagnetic compatibility
- Compliance with European standards 42/2006 Direct drive tractor system
Installation:
The system can be installed indoors or outdoors. The electrical system must always be placed in a special protection state. If the operating temperature below 00C is required to equip oil heating. For outdoor installation, the ladder system must be covered. Hydraulic cylinders with standard lengths are 3, 6, 9m
Working load: The table below shows the working load depending on the cabin and cabin door system.
| E07-Vimec Easy move series cabin Workload |
Workload (Kg) |
| Cabin with colored painted walls or stainless steel |
400 |
| Cabin with glass wall or ½ glass |
400 |
| Cabin with a painted or stainless steel wall door |
350 |
| One-door cabin + glass walls |
350 |
| One-door cabin + two glass wall or ½ glass |
300 |
| 2-door cabin + color stainless steel paint walls |
300 |
| 2-door cabin + one glass wall or ½ glass |
|
Journey: 9.25m
Height OH: 2,270 mm; 2,600 mm if the cabin is provided with automatic glass doors.
Transmission: Hydraulic transmission
Speed: Up to 0.15 m / sec; HS version (provided with a counterweight) up to 0.26 m / s other markets.
Size of installation elevator
