5 ELEVATOR SPECIFICATIONS NEEDED
Choosing an elevator that is suitable for family use is the top concern of customers when deciding to build their own home. So which household elevator specifications should be concerned?
The load determines the size of the ladder well
Load: The lift for the family is not only a travel solution but also an architectural solution for your home, choosing a load suitable for the purpose of use to harmonize space, save space Analysis and cost savings are the top priority.
Therefore, it can be said that load is the first factor that customers must think of in many home elevator parameters. The higher the load, the bigger the space requirement, the higher the cost and if you use it inefficiently it's a waste.
For small houses, elevators are usually designed within the staircase, the most common load is 250kg (for 3-4 people). For larger houses, which require more versatility, we can think of a load of 450 kg or more for about 6 - 7 people.
The size of an elevator well: The lift well is a prismatic space (round, octagon, triangle) for the elevator cabin to operate up and down. The size of the lift well is the cross-sectional dimension of the lift well, including the frame structure and lift cabin. The size of the lift well depends on the load, the type of the ladder, the area and the capacity of the building.
For Nam Long Family Elevator, where can provide micro-lifts, only need a clear area from 65 * 91cm (width * depth) to be able to design an elevator with an area The cabin is 45 * 55 cm wide, enough space for 2 people and the payload is up to 250kg.
However, when there is more space, we can design more satisfactory ladders, the minimum size for a 450kg ladder is about 160 * 180 cm.
Other home elevator specifications to consider
PIT pit depth
The lift well below the lowest floor floor, usually designed in a negative position compared to the natural position of the ground called the PIT lift pit. It is a safe space for the bottom of the cabin to go down when the elevator reaches the bottom floor as well as perform some other safety functions.
In a family lift system, cable car technology lifts usually require a greater depth of pit pistons than a hydraulic lift.
This is what you need to keep in mind when choosing the right type of elevator, especially when you renovate your home, don't want or can't dig deep pits due to the underground work or you need to install elevators from the 2nd floor upwards.
> See details of household elevators
A great suggestion for you: Gama family elevator with criterion 3 no:
- No pit
- No engine room
- Does not waste space
With this option, you only need a little floor space of about 10 - 15 cm (just over half a glove) for the PIT pit to be able to get a home lift that suits your requirements.
Height of the top floor (height OH - overhead)
The top floor of an elevator-mounted building, usually must be higher than the other floors, because when the elevator reaches the top stop, it needs an extra space to accommodate functional devices placed on the roof of the cabin, ensuring safety. when speeding as well as needing a certain space to serve the technical work.
The distance from the top floor to the bottom of the engine room (if any) or the ceiling is called the top floor height (OH - overhead height).
The height of the top floor depends on the elevator technology, the type of elevator with engine room, or not as well as the installation location.
For Nam Long Family Elevator, the height of the top floor is very low, only from 2450mm, even less than a standard floor of a 4-level house (about 3000mm), so many families can install it. elevator up to the att floor.
Power and capacity of household elevators: Gama family elevators use 1 phase or 3 phase household electricity. Power from 1.1 - 2.3kw
Technical specifications of Nam Long family elevator
Above, just a few basic information about the family lift specifications you need to consider before making a decision to choose an elevator that suits your needs and capabilities.
Before making a decision, you do not need to research too much about the structure of a home elevator, it is not necessary, let the experts and counselors help you before making a decision. final.
Load: The lift for the family is not only a travel solution but also an architectural solution for your home, choosing a load suitable for the purpose of use to harmonize space, save space Analysis and cost savings are the top priority.
Therefore, it can be said that load is the first factor that customers must think of in many home elevator parameters. The higher the load, the bigger the space requirement, the higher the cost and if you use it inefficiently it's a waste.
For small houses, elevators are usually designed within the staircase, the most common load is 250kg (for 3-4 people). For larger houses, which require more versatility, we can think of a load of 450 kg or more for about 6 - 7 people.
The size of an elevator well: The lift well is a prismatic space (round, octagon, triangle) for the elevator cabin to operate up and down. The size of the lift well is the cross-sectional dimension of the lift well, including the frame structure and lift cabin. The size of the lift well depends on the load, the type of the ladder, the area and the capacity of the building.
For Nam Long Family Elevator, where can provide micro-lifts, only need a clear area from 65 * 91cm (width * depth) to be able to design an elevator with an area The cabin is 45 * 55 cm wide, enough space for 2 people and the payload is up to 250kg.
However, when there is more space, we can design more satisfactory ladders, the minimum size for a 450kg ladder is about 160 * 180 cm.
Other home elevator specifications to consider
PIT pit depth
The lift well below the lowest floor floor, usually designed in a negative position compared to the natural position of the ground called the PIT lift pit. It is a safe space for the bottom of the cabin to go down when the elevator reaches the bottom floor as well as perform some other safety functions.
In a family lift system, cable car technology lifts usually require a greater depth of pit pistons than a hydraulic lift.
This is what you need to keep in mind when choosing the right type of elevator, especially when you renovate your home, don't want or can't dig deep pits due to the underground work or you need to install elevators from the 2nd floor upwards.
> See details of household elevators
A great suggestion for you: Gama family elevator with criterion 3 no:
- No pit
- No engine room
- Does not waste space
With this option, you only need a little floor space of about 10 - 15 cm (just over half a glove) for the PIT pit to be able to get a home lift that suits your requirements.
Height of the top floor (height OH - overhead)
The top floor of an elevator-mounted building, usually must be higher than the other floors, because when the elevator reaches the top stop, it needs an extra space to accommodate functional devices placed on the roof of the cabin, ensuring safety. when speeding as well as needing a certain space to serve the technical work.
The distance from the top floor to the bottom of the engine room (if any) or the ceiling is called the top floor height (OH - overhead height).
The height of the top floor depends on the elevator technology, the type of elevator with engine room, or not as well as the installation location.
For Nam Long Family Elevator, the height of the top floor is very low, only from 2450mm, even less than a standard floor of a 4-level house (about 3000mm), so many families can install it. elevator up to the att floor.
Power and capacity of household elevators: Gama family elevators use 1 phase or 3 phase household electricity. Power from 1.1 - 2.3kw
Technical specifications of Nam Long family elevator
|
Weight |
250kg, 300kg, 400kg, 450kg |
|
Electricity supply |
Use 1-phase or 3-phase household electricity |
|
Motor power |
From 1.1 to 2.3 kW |
|
Drive system |
Cable pulling |
|
Height on the top floor |
>= 250cm |
|
Pit depth |
10 – 15 cm |
|
Structure of ladder pit |
By concrete, bricks or aluminum frame |
|
Elevator doors |
Type 1: Open manually Type 2: Open automatically |
|
Cabin to the floor door |
By glass, stainless steel, wood ... or other materials |
Above, just a few basic information about the family lift specifications you need to consider before making a decision to choose an elevator that suits your needs and capabilities.
Before making a decision, you do not need to research too much about the structure of a home elevator, it is not necessary, let the experts and counselors help you before making a decision. final.